| | 1. To adopt the special constant current driving system of high power LED, the efficiency of driver is high and the heating value of its circuit is low, the output current is stable and extending the lifespan for LED. Index Dimming Curves nearly coincide with LED’ s curve of spectrum. There is more advantage than the traditional linear dimming curves.
2. With DMX decoder. Decoding DMX signal to be processible signal for LED driver, which driving LED to dimming and changing color directly.
3. Each dimming level is 256, the color development modulus for the sum of R, G, B which reach 16777216 levels. 16bit × 3 channels data adjustment.
4. Working Voltage DC 12V~ 48V, it can choose the fitting voltage according to LED quantity.
5. Protection Function: Over current, Short circuit.
6. Driving LEDs’ QTY: 1-12pcs each channel, 3-36pcs each 3 channels.
7. Power of Driver: 36W/ 72W/ 180W
8. Dimming system: electronic dimming, control the light’ s output from 0-255% , the minimum time of fade in and fade out is 100ms.
9. ZAP Strobe: Variable sync for Speed or electronic strobe at random, the pulse strobe efficiency of fade in and fade out
10. Efficiency of Lambency: controller can be a gradual realization of a variety of colors, blinking, chasing, scan effect, it can be widely used in building outline, bridges, buildings background lighting, lighting exhibitions, and even geographical and Condenser lighting, amusement parks, and other club.
11. Communicating agreement: Standard DMX512, it can fit for the consoles of different factory, different type and intelligent automatic addressing. Do not need to write DMX address separately. DMX address is automatic intelligent assignment. It is easily to install and debugging.
12. User interface: Four digitals display, DMX address code and inset programs.
13. Operating Function: inset 15 programs, there are other 15 programs of discoloration for users to program, once no DMX console, it also can edit the different lighting effect. Setting 1 set to be host, which its sync signals of output control other slaves to discolor synchronously.
Control slaves’ programs and parameters by DMX512.
14. Dimension of driver board: 112mm× 65mm× 17mm ( L× W× H) . | | |
|
)